"> Tarpaulin Center Sealing Machine - Shri Gurukrupa Engineering

Tarpaulin Center Sealing Machine

Tarpaulin Center Sealing Machine Single Head
Electric Power Requirement Three Phase supply 440V
Body Heavy Robustic Structure
Power Consumption 7.5 HP (5.6 KW)
Production Capacity 6 Ton per Day (24 Hours)
Production Output / Minute 45 Mtr. to 60 Mtr. (Depending on Operating Conditions)
Fabric Sealing in GSM 65 GSM to 750 GSM
Control Panel Frequency Controlled AC Drive & DC Drive with Digital Controller
Man Power Required 1 Experience operator and 2 helper
Size of Machine 11fit L x 3 ft W x 5 ft. H (As per the Width of your fabric to be sealed)
Weight of Machine 600 Kg.

TARPAULIN CENTER SEALING MACHINE

(SINGLE HEAD)

Our firm offers a high quality range of  Tarpaulin sealing Machines to our esteemed clients. We are considered as a specialist in offering the most sought after range of Tarpaulin Sealing Machine. This superior make machine is designed and developed in line with the international quality standards set by the industry.

We offer these machines in various specifications such as: The machine will be on robust structure fit for center sealing of 65 to 500 GSM fabric up to 12 feet max, Our Center Sealing Machine Seals of HDPE/PP Laminated Fabric, LD Sheet of above 500 gauge & PVC Coated, SRF Nylon Sheet, Flex Banner (Poster), Polyester Fabric Coated Material. The machine has one side open and the fabric enters from the top and seals fabric, which falls at the bottom where it can be folded easily. The center cantilever has heavy steel structure to mount electrical controls air blower and pressure system assemblies. This machine has 2 Nos. of unwinder, opposite to each other, with brake attachment shaft. Edge welding width 35 mm to 50 mm

HEATING SYSTEM: Forced heated air through nozzles at the nips.

UTILITIES TO BE PROVIDED BY CUSTOMER: 1. 4 Sq. mm 4 Core copper cable for main supply to the machines with proper earthling.

OUT PUT: 25 to 60 Mtrs. / Min. at max. Speed (Depending on operating Conditions) LAND AREA REQUIRED FOR MASS PRODUCTION ON CENTER& SIDE

SEALING UINT: For mass production on any one of the units mentioned above requires a minimum land Area Of 2400 Sq. Feet (60Ft. X 40Fit).

POWER LOAD:- (THREE PHASE SUPPLY): 1 HP DC drives for machine roller. 1 HP AC motor for Air Blower. 4.5 KW (5.4 HP) Heater. Total connecting load – 7.5 HP(THREE PHASE SUPPLY)

CONTROL PANEL: In house electronic and electrical assemblies and DOL’s for blower’s etc. Each circuit will be provided with ELMCB for safety plus a heavy duty MCB for the mains.

DRIVE SYSTEM: The machine will be provided with DC motor (Thruster Controlled) coupled to heavy duty reduction gearbox and pulley through the main shaft.

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.